Home

Tractors

Implements

Earth Moving
Machinery
 
 
 
 
 
 
 
 
 
 
 
 

 

Massey Ferguson MF-375 4WD
 
 
PERFORMANCE:

Rated Engine Power*:   78 BS HP (58.2 KW)
    @ 2200 rev/min**:  71 DIN PS (52.3 KW)
Max. Engine Torque
    @ 1400 rev/min is  268 Nm (218 lbf. ft)
Max. P.T.O. HP:
    @ rated Engine Speed*** 64.0 Ps (47.1 KW)

* Certified to BSAU 141 a
** DIN 70020
*** Manufacturer's Estimate

ENGINE:

Make/Type:   Perkins/A 4.236
No. of Cylinders: 4
Injection:   Direct
Bore:   98.4 mm (3.875 in)
Stroke:   127.0 mm (5.0 in)
Capacity:  3.86 Liter (236 cu. in)
Compression Ratio: 16.0:1
Starting Aid:   Thermostat
Cooling:  Water
Air Cleaner:  Oil Bath
Air pre-cleaner: Over-bonnet, Centrifugal
Fuel Filter:  Dual, High Capacity
Exhaust:  Vertical, Muffler under Bonnet

ELECTRICS:

Voltage:  12 Volt, Negative Earth
Battery :  96 Amp hour
Alternator/Starter: 45 Amp/2.2 KW
Light:   Head Lights, Side Lights, Brake Light,
             Direction Indicators, Rear Work Lamp
Safety Start:  Transmission & PTO
Other:   Horn

CLUTCH:

Type:   Dual
Diameter:  305 x 254 mm (12 in x 10 in)
Lining Material: Cerametalic or Asbestos

POWER TAKE - OFF:

Type:   Live PTO
Speed:   540 rev/min @ 1789 
   engine rev/min, Single Speed
Shaft Diameter: 35 mm (1.38 in)
No. of Splines:  6

TRANSMISSION:

Type:   Sliding Spur
No. of Gears:  8 Forward, 2 Reverse
    Road Speed @ rated engine speed with
    18.4/15 - 30 rear tyres:
Gear:               Speed mile/h (km/h):
Forward 1         1.7 (2.5)
Forward 2          2.3 (3.7)
Forward 3          3.2 (5.1)
Forward 4          4.2 (6.8)
Forward 5          6.4 (10.4)
Forward 6          9.4 (15.2)
Forward 7          12.9 (20.8)
Forward 8          17.3 (27.9)
Reverse 1           2.1 (3.5)
Reverse 2           8.8 (14.1)

HYDRAULICS:

Functions:  Draft, Piston, and Response Control
    Constant Pumping
Pump Type:  Piston
Max. Output:  16.7 liter/min
   (3.67 imp. gal/min)
Max. Lift Capacity:  2145 Kg (4728 lb)
   At Lower Link Ends,
   Links Horizontal
3 - Point Linkage: Cat 1 & 2 Interchangeable 
                               Balls
 

STEERING:

Type:   Hydrostatic 
Steering Wheel: Fixed, Padded

4WD FRONT AXLE:

Axle Type:  Parallel Drive
Engagement:  Mechanical
Max. Tuning Angle: 50

BRAKES:

Type:   Oil Immersed Disc Brakes, 4 Plates
Braking Area:  1774 sq. cm (275 sq. in)
Operation:  Hydraulic
Parking Brake:  Hand Lever Operated

INSTRUMENTATION:

Gauges:   Tachometer/Hour Meter, 
    Fuel, Water, Temperature, Speed Indicator
Warning Lights: Direction Indicators, 
                            Electric Charge,
                            Head Light Main Beam,
                            Low Engine Oil Pressure,
                            4WD indication Light

WHEEL AND TYRES:

Front:   12.4 – 24 (6PR) Pressed
Rear:   18.4/15 - 30 (6PR) Pressed

TRACK ADJUSTMENT:

Front:   1376 - 1944 mm
   (216 mm high axle) (54 - 76 in)
Rear: – pressed:  1423 - 2134 mm
   (56 - 84 in)

WEIGHTS AND DIMENSIONS:

(With 12.4 - 24 Front and 18.4/15 - 30 
Pressed Rear Wheel with Full Fuel, Oil and Water)

Weight Front:   1429 Kg (3144 lb.)
Weight Rear:   1582 Kg (3488 lb.)
Weight Total:   3011 Kg (6638 lb.)
Overall Length:  3810 mm (150 in)
Width – Min.:   1871 mm (73.7 in)
Height-:
   Over Exhaust:  2485 mm (97.8 in)
   Over Steering Wheel: 1781 mm (70.1 in)
   Wheel Base:   2350 mm (92.5 in)
   Turning Circle:   8518 mm (335 in)
                            (Less Brake) 
   Ground Clearance 
   Under Gear Box:   501 mm (19.8 in)
   Under 4WD Front Axle: 395 mm (15.6 in)

CAPACITIES:

Fuel Tank:   108 liter (23.8 lmp. gal)
Engine Sump:   7.5 liter (13.2 lmp. pint)
Air Cleaner:   0.6 liter (0.5 Pt)
Cooling System:  15.2 liter (26.8 lmp.pt)
Hydraulic System:  47.4 liter (10.3 lmp.gal)
Power Steering Reservoir: 1.2 liter
4WD Front Axle Differential: 5.6 liter
Hub Each Size:   1 liter

STANDARD EQUIPMENT:

- Chain Stabilizers
- Weight Frame without Weights
- Set of Tools
- Top Link
- Operator's Manual
- Cat. 1 Balls
- Check Chains

OPERATOR AREA:

Seat:   Cushioned
Fenders:  Flat Top
Tool Box:  Standard
 

 
-  For detailed specifications and advice on the proper use of implements, please contact the company's office.