Home

Tractors

Implements

Earth Moving
Machinery
 
 
 
 
 

 

MF - 385 Tractor
 
 
PERFORMANCE:

Rated Engine Power at 2,200 rpm:   *85 HP
Max. Engine Torque at 1,600 engine rpm
    291 Nm
Max. P.T.O. power at 2,200 engine rpm:
    *70 HP
* Manufacturer's Estimate

ENGINE:

Make / Type:   Perkins / 4.41
No. of Cylinders: Four
Injection:   Direct
Bore:   101 mm (3.98 in)
Stroke:   127.0 mm (5.0 in)
Capacity:  4.1L (248 cu. in)
Compression Ratio: 15.3:1
Starting Aid:   Thermostat
Throttle Control:   Hand and Foot
Cooling:  Water
Air Cleaner:  Oil Bath
Air pre-cleaner: Over-bonnet, air swirl
Fuel Filter:  Dual, High Capacity with sedimentor
Exhaust:  Vertical, Muffler under Bonnet

ELECTRICS:

Voltage:  12 Volt, Negative Earth
Battery :  96 Ah
Starter Motor :  2.8 kW
Alternator : 45 A
Light:   Head Lights, Side Lights, Brake Light,
             Direction Indicators, Rear Work Lamp
Safety Start:  Transmission & PTO
Other:   Horn

CLUTCH:

Type:   Dual
Diameter:  305 x 254 mm (12 in x 10 in)
Lining Material:  Cerametallic

POWER TAKE - OFF:

Type:   Live
Engine Speed at 540 PTO rpm:   1,789 rpm 
Shaft Diameter: 35 mm (1.38 in)
No. of Splines:  6

TRANSMISSION:

Type:   Sliding Spur
No. of Gears:  8 Forward, 2 Reverse
    Road Speed @ rated engine speed with
    18.4/15 - 30 rear tyres:
Gear:             Speed mph (kph):
Forward 1         1.7 (2.25)
Forward 2          2.3 (3.7)
Forward 3          3.2 (5.1)
Forward 4          4.2 (6.8)
Forward 5          6.4 (10.4)
Forward 6          9.4 (15.2)
Forward 7          12.9 (20.8)
Forward 8          17.3 (27.9)
Reverse 1           2.1 (3.5)
Reverse 2           8.8 (14.1)

HYDRAULICS:

Functions:  Draft, Piston, and Response Control
    Constant Pumping
Pump Type:  Four-Piston, Ferguson Pump
Max. Oil Flow:  16.7 liter/min
   (3.67 imp. gal/min), 207 bar (3000 lbf/in2)
(At nominal Operating Temperature)
Max. Pressure:  207 bar (3,000 psi) at normal operating temperature
Max. Lift Capacity at Lower Links horizontal:  2,145 Kg (4,728 lb)
Lower Links: Cat 1 & 2 with Interchangeable 
                               Balls

FRONT AXLE:

Type:  Box Section, Adjustable
Steering System:  Hydrostatic

STEERING:

Type:   Hydrostatic 
Steering Wheel: Fixed, Padded

BRAKES:

Axle Type:   Straddle with apicyclic reduction
Brake Type:   Oil Immersed, Multi-disc
Braking Area:  1774 sq. cm (275 sq. in)
Brakes Actuation:  Hydraulic
Parking Brake:  Hand Lever Operated

INSTRUMENTATION:

Gauges:   Tachometer, Hour Meter, 
    Fuel, Water, Temperature
Warning Lights: Direction Indicators, 
                            Electric Charge,
                            Head Light Main Beam,
                            Engine Oil Pressure, Brake Lights

WHEEL AND TYRES:

Front:   7.50 - 16 (6PR) Pressed
Rear:   18.4/15 - 30 (6PR) Pressed

TRACK ADJUSTMENT:

Front:   1,271 - 1,881 mm (50 - 74 in)
Rear – pressed:  1,423 - 2,134 mm (56 - 84 in)

WEIGHTS AND DIMENSIONS:

(With 7.50 - 16 front and 18.4/15 - 30 Rear Wheel with Full Fuel, Oil and Water)

WEIGHT:
Weight Front Axle:     1,228 Kg (2,701 lb.)
Weight Rear Axle:      1570 Kg (3,461 lb.)
Total:     2,798 Kg (6,162 lb.)
DIMENSION:
Wheel Base:  2,286 mm (90 in)
Overall Length:  3,760 mm (148 in)
Width (Min.):     1,871 mm (73.7 in)
HEIGHT:
Over Exhaust:  2,485 mm (97.8 in)
Over Steering Wheel: 1,781 mm (70.1 in)
TURNING CIRCLE:
Without Braking: 7,502 mm (295 in)
GROUND CLEARANCE:
Under Gear Box:   501 mm (19.8 in)

CAPACITIES:

Fuel Tank:   108 liter (23.8 lmp. gal)
Engine Sump:   7.5 liter (13.2 lmp. pint)
Air Cleaner:   0.7 liter
Cooling System:  15.2 liter (26.8 lmp.pt)
Hydraulic System:  36 liter
Hydrostatic Steering Reservoir: 2 liter

STANDARD EQUIPMENT:

Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator's manual 

OPTIONAL EQUIPMENT:

- Front End Weights
- PTO Pulley
- Sun Canopy
- 9 Hole Draw Bar
 

 
-  For detailed specifications and advice on the proper use of implements, please contact the company's office.